How To Remove Silicone From A Fiberglass Boat

original-file.jpg

The silicone gelcoat on your boat is one of its most
important features, protecting the strength, color, and durability of your
boat’s fiberglass. But it can also prove to be one of its chief challenges.
Just how do you remove silicone without damaging the underlying fiberglass? Is
it possible to handle yourself without a professional assisting you? Sure
thing. Just follow these tips on how to remove silicone from a fiberglass boat!

Avoid the “Elbow
Grease Method”

In cases like hard stuck-on silicone, many boat owners will
tell you that you’re in for a hefty bit of manual labor. This is known as the
“elbow grease method.” In other words, they want you to use basic tools and
scratch off the silicone yourself. The problem with this method isn’t only that
it’s labor-intensive. If you use the wrong tools, it can also pose a risk to
the quality of your gel coat and your fiberglass.

If you have the right tools at your disposal, you won’t need
to use figurative elbow grease to get the job done. In fact, it’s better for
the underlying fiberglass if you’re able to remove old silicone effectively and
without as much struggle. Not only will you stand a better chance at removing
entire swaths of silicone at once, but you’ll save a lot of time and
frustration along the way.

Use Products Designed
to Handle Gel Coat

Removing silicone from a fiberglass boat can require a
steady hand and specialized equipment. That’s why it’s imperative to procure a
product specifically designed for gentle application and the removal of
stuck-on materials like silicone.

If you only have a small amount of silicone to deal with, try
Release
Adhesive & Sealant Remover
. With a proper scraping tool designed
specifically for handling fiberglass, you’ll be able to remove cured silicone
sealants from your boat’s hull. The goal here is to apply generously, going a
little bit at a time. The more of the silicone you’re able to remove in one
piece, the better.

Why Release? It has
great features for removing silicone from fiberglass:

  • It’s designed for multiple surfaces, such as
    fiberglass and wood, which makes it easier to remove sealant that’s been
    applied in more than one area in your boat.
  • The easy-spray applicator makes it possible to
    apply the right amount consistently, peeling back the silicone as you go.
  • Because it’s designed for fiberglass, you won’t
    have to worry about the application having adverse effects on the underlying
    boat hull.

The key is to work slowly and deliberately, pulling back
adhered silicone bit by bit until it comes off cleanly. This will help ensure
an even look to your fiberglass underneath.

If you want more tips on removing adhered materials from
your boat, check out the boat solvent products
available here at BoatLIFE today!

Leave a Reply

All products proudly made in the usa

Download Catalog